- Apc Network Management Device Ip Configuration Wizard V5.0.3 Download
- Apc Network Management Device Ip Configuration Wizard Reviews
- Apc Network Management Device Ip Configuration Wizard Windows 10
- Apc Network Management Device Ip Configuration Wizard
APC Device IP Configuration Wizard 3.0.1 can be downloaded from our website for free. Apcutilg.exe is the frequent file name to indicate this program's installer. APC Device IP Configuration Wizard belongs to Internet & Network Tools. Our built-in antivirus checked this download and rated it as 100% safe. The Network Management Device IP Configuration Wizard only supports the discovery of unassigned devices. You cannot search for assigned devices already on the network using an IP range unless you enable SNMPv1 and set the Community Name to 'public'. For more information on SNMPv1, see the UserGuide. When the NMC IP address settings are configured, to access. Network Management Device IP Configuration Wizard v5.0.3. Network Management Device IP Configuration Wizard v5.0.3. Thank you for registering for email from APC. I receive 2 new ups APC SMT1500C. I connect to my switch, I have a dchp, I receive an ip. But I wasn’t able to connect to the web page of the ups, I try, Network Management Device IP Configuration Wizard, I scan the network (I am on the same Vlan than the ups) but I can’t find it.
128 pages, 930.29 KbSuccess! {{ $ctrl.successMessage }}
0'>Errors!
>
Device IP Configuration WizardCapabilities, Requirements, and Installation
How to use the Wizard to configure TCP/IP settings
The Device IP Configuration Wizard configures the IP address, subnet mask, and default gateway of one
or more Rack PDUs or network-enabled devices (devices containing an embedded APC Network
Management Card [NMC]). You can use the Wizard in either of the following ways:
• Remotely over your TCP/IP network to discover and configure unconfigured Rack PDUs or
devices on the same network segment as the computer running the Wizard.
• Through a direct connection from a serial port of your computer to a Rack PDU or device to
System requirements
Version 5.0.0 or higher of the Wizard runs on Microsoft Windows 2000, Windows Server® 2003,
Windows Server® 2008 Windows XP, Windows Vista, and Windows 7.
Installation
To install the Wizard from a downloaded executable file:
2.Download the Device IP Configuration Wizard.
3.Run the executable file in the folder to which you downloaded it.
Use the Wizard
Most software firewalls must be temporarily disabled for the Wizard to discover unconfigured Rack
Launch the Wizard
The installation creates a shortcut link in the Start menu to launch the Wizard.
Configure the basic TCP/IP settings remotely
Prepare to configure the settings. Before you run the Wizard:
1.Contact your network administrator to obtain valid TCP/IP settings.
2.If you are configuring multiple unconfigured Rack PDUs or network-enabled devices, obtain the
MAC address of each one to identify it when the Wizard discovers it. (The Wizard displays the
MAC address on the screen on which you then enter the TCP/IP settings.) The MAC address can
•On a label on the device
•On the Quality Assurance slip that came with the Rack PDU or device
Download 128 pages, 930.29 Kb Success! {{ $ctrl.successMessage }}
0'>Errors!
>
Run the Wizard to perform the configuration. To discover and configure the unconfigured Rack
1.From the Start menu, launch the Wizard. The Wizard detects the first Rack PDU or network-
2.Select Remotely (over the network), and click Next >.
3.Enter the system IP, subnet mask, and default gateway for the Rack PDU or device identified by
On the Transmit Current Settings Remotely screen, if you check-mark Start a Web browser
when finished, the default Web browser connects to the Rack PDU or device after the Wizard
4.Click Finish to transmit the settings. If the IP address you entered is in use on the network, the
Wizard prompts you to enter an IP address that is not in use. Enter a correct IP address, and click
Apc Network Management Device Ip Configuration Wizard V5.0.3 Download
5.If the Wizard finds another unconfigured Rack PDU or device, it displays the screen to enter
TCP/IP settings. Repeat this procedure beginning at step 3, or to skip the Rack PDU or device
whose MAC address is currently displayed, click Cancel.
Configure or reconfigure the TCP/IP settings locally1.Contact your network administrator to obtain valid TCP/IP settings.
2.Connect the provided serial configuration cable (APC part number 940-0144A) from an available
communications port on your computer to the serial port of the Rack PDU or device. Make sure
3.From the Start menu, launch the Wizard application.
4.If the Rack PDU or network-enabled device is not configured, wait for the Wizard to detect it.
5.Select Locally (through the serial port), and click Next >.
6.Enter the system IP, subnet mask, and default gateway for the Rack PDU or device, and click
7.On the Transmit Current Settings Remotely screen, if you select Start a Web browser when
finished, the default Web browser connects to the Rack PDU or device after the Wizard transmits
8.Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use on the
Apc Network Management Device Ip Configuration Wizard Reviews
network, the Wizard prompts you to enter an IP address that is not in use. Enter a correct IP
Apc Network Management Device Ip Configuration Wizard Windows 10
9.If you selected Start a Web browser when finished in step 6, you can now configure other
Apc Network Management Device Ip Configuration Wizard
parameters through the Web interface of the Rack PDU or device.